Volga model Guffer table gas

Volga Guffer tabletop gas with different flame design is suitable for work and home environments. In this gas stove, the extra guards have been removed so that the distance between the flames is large and there is enough space to place large dishes. Also, several dishes are easily placed on the gas stove together. A black screen with similar flames have given a beautiful appearance to this gas. The flames are placed two by two next to the gas stove and the rice cooker flame is in the middle. This gas is 88 cm long, which is one of the big gases. This oven is compatible with city gas and has energy consumption grade A. Thermocouple, which is embedded in almost all gases, is also present in this gas to maintain security. The volumes of this gas work manually to increase and decrease the flame. The volumes are designed on the gas plate.

How is the Volga tabletop gas designed?

body

The plate of this gas stove is a glass plate with 5 flames on it. The glass of the oven makes it easy to clean. The glass can be easily cleaned with detergent or glass cleaner and a tissue. It is better to clean the tabletop gas plate after each use so that it is not difficult to clean them due to the adhesion of fats. The direction of the flames is marked with a symbol on the body to prevent fire. In gas stoves, the direction of movement of volumes is counter-clockwise. If this point is taken into account, the possibility of fire will be reduced. The table gas body is made of steel, glass and enamel. Each of these materials has its strengths and weaknesses. Steel is a resistant material, but it changes color due to high heat. It is possible to clean the steel table gas with a wire and a little detergent. Glazed gauze is a little more difficult to clean. This gas must be cleaned quickly after each use. If food is spilled on the glaze, it cannot be cleaned with Scotch because it will scratch the body. All kinds of cleaning materials can be used to clean glass gas, and a temperature tolerance of 350 degrees is considered for glasses. For installation, the cabinet must be cut to the size of the gas. It is necessary to measure the dimensions of the gas correctly so that it does not cause problems for installation. The sheet gas is embedded in a short period of time. The impact resistance test for glasses is done in the factory in a precise way, so there is no need to worry about breaking this gas screen.

Volga Volga cast iron tabletop gas grid

There is a cast iron on the top of the burners on which pots and dishes can be easily placed. The designed cast iron makes it possible to place any size container on the gas. The cast iron grate has a cross shape to make the gas stove look more beautiful. All the flames of this gas stove are not the same size so that different dishes can be placed on it. Boiling milk requires a smaller flame than a large pan. Cast iron network exists in different forms in different gases. Gas design changes according to this network. In some cases, the cast iron is all over so that all kinds of containers can be placed on it. The discontinuous cast iron grid that exists in this model of Guffer plate gas is considered separately for each container. These cast irons are easier to wash. The cross shape of this cast iron is for placing large dishes on the flame as well as possible.

The dimensions of the Guffer table gas, Volga model

The dimensions of this table gas are 88.51 cm, which has the standard of a gas. This means that this gas is used for small and large kitchens. For the length of 88 cm, this gas stove is considered a special compartment in the cabinet. There is no need to worry about the standard dimensions of the Guffer desktop. Choosing the color of the gas stove is a matter of taste and depends on the color scheme of the house.

volume

The volumes of this gas are located on the body and in the lower middle part of the screen. Volume is resistant to heat, but it heats up due to heat. During cooking, it is better to adjust the volumes with gloves. The volume of Guffer table gas is considered to be 5 per flame.

the flame

A round cast iron is placed on the flames, which is called the flame. The flame is used to control the heat and prevent it from spreading. The flame has an effect on increasing the safety of the device. The parts of this table gas are made from an Italian company that has a well-known name in the world. The flame of this gas belongs to DEFENDI, Italy.

What are the features of the Volga Volga tabletop gas?

Automatic lighter

The use of matches forced gas manufacturers to use lighters because of its dangers. To use the automatic lighter, it is enough to push the volume of each flame inward, turn it and release it after a few seconds to turn on the gas automatically. In a non-automatic lighter, the lighter button must be pressed while turning the volume, which is not possible with one hand. In addition to increasing security, the automatic lighter has made things easier.

Thermocouple

In today’s modern gas stoves, a piece called a thermocouple is designed, which turns off the gas flame after the food is finished. The thermocouple is located next to the torch. When the gas suddenly shuts off, this part helps to prevent fire by cutting off the gas. The safety of this oven is ensured by an ultra-rapid thermocouple. This thermocouple makes the gas stove speed up after the flame is extinguished. To test the thermocouple, you can turn on the gas flame; Then he turned it off with a windbreaker. If the gas flow is interrupted, it is a sign of the correct operation of the thermocouple. Sometimes the flame turns off by itself during cooking. This is a sign of a faulty thermocouple.